Depending on your mounting atmosphere, you might want to secure the MR55 to its mount spot. Your MR55 is often secured in a number of means. In the event the MR55 has been set up using the mount cradle, it should be secured through protection screw (Torx security screws are incorporated) and/or Kensington lock. In the event the mount cradle wasn't utilized, the MR55 can even now be secured utilizing a Kensington lock

The Cisco Meraki MR55 is actually a twin-band organization course 802.11ax cloud-managed obtain level with interior antennas. Designed for high ability and higher density, the MR55 meets the needs of one of the most demanding environments.

employing included wall anchors and screws, attach the mount cradle for your mounting wall or ceiling. It is suggested which the MR55 be mounted to a wall or strong ceiling using the mount cradle for physical security reasons.

If mounting to your wall or ceiling, the Ethernet cable will feed from powering the MR55. The "energy Source possibilities" area of the doc lists different powering choices as well as their special characteristics. 

If mounting to an electrical junction box, feed the Ethernet cable throughout the cable access gap in the mount cradle.

When employing DHCP, the DHCP server should be configured to assign a static IP handle for every MAC tackle belonging to some Meraki AP. Other options from the wi-fi network, such as 802.1X authentication, may possibly depend upon the residence that the APs have static IP addresses.

Your MR55 is equipped by using a multi-color LED gentle around the front with the device to Express information about program operation and general performance:

Using the dashed traces over the mount cradle template as being a tutorial, established the right spacing of your T-rail clips around the T-rail.

To launch the MR55 in the mount cradle, first get rid of the security screw that secures the MR55 on the cradle’s base tab.

Configure the static IP deal with, net mask, gateway IP address and DNS servers this AP will use on its wired more info link.

to be certain your MR55 performs optimally promptly following installation, it is usually recommended that you just facilitate a firmware improve before mounting your MR55.

Examine LEDs The Power LED really should be reliable inexperienced (or blue, if clientele are connected). If it is flashing blue, the firmware is mechanically upgrading as well as the LED should flip eco-friendly if the upgrade is accomplished (Typically inside of a few minutes). begin to see the "LED Indicators" section for more particulars. .

You should use your account to ask for a substitute Social protection card, Examine the position of an application, estimate future Added benefits, or regulate the benefits you currently receive.

We’re committed to using the most effective systems available to safeguard your own details; further stability steps hold you Protected and protected.

The entry position also includes a third radio focused on optimizing the RF setting and securing the airwaves along with a BLE radio for supporting IoT apps. 

If the button is pressed and held for a minimum of five seconds then produced, the MR55 will reboot and be restored to its first manufacturing facility configurations by deleting all configuration info stored about the unit.